home icon
home icon
Red
 

Smoothfaced/
Sandfaced

Perhaps, the best known and most widely used natural colour produced from Etruria Marl.  Ideal for matching and repairs, with their subtle shade variations, the traditional red Smoothfaced single camber clay roof tile is widely used throughout areas where clay tiles are established and appreciated for its rich red colour. Red Sandfaced tiles give a softer appearance and are chosen more frequently in the South.
 

How can I get a Sample      

Download Brochure

Dreadnought Red smoothfaced plain clay tiles Dreadnought red sandfaced plain clay tiles Red Ornamental Fishtail tiles were used to refurbish this Grade II listed lodge Anchor Retirement Home at Bishopstoke Park Red Smooth tiles with Plum Red on the verticals Red Smooth tiles with bonnet hips and matching ornamental ridge Red Smooth tiles with bands of ornamentals provide an effectiive contrast to the stonework Red  and staffordshire blue roof tiles at Tyntesfield Red and staffordshire blue tiles reroof Tyntesfield Red Smoothfaced tiles St Barnabas Hospital Saltash

Case Studies

Tyntesfield House, Grade I listed winner 2012 RICS SW Building conservation

Red and Staffordshire Blue Plain Clay Roof Tiles

Red  and staffordshire blue roof tiles at TyntesfieldRed Tyntesfield casestudy

For this £4.7 million restoration, co-funded by English Heritage and the Heritage Lottery Fund, Project architects Rodney Melville & Partners, of Bristol, were tasked with the specification of clay plain roof tiles to recreate the elaborate diaper pattern of Tyntesfield’s pitched roof, which comprised 65,000 red and blue/black roof tiles.  The main task therefore was to colour match the original tiles with ‘like for like’ replacement tiles.  Dreadnought provided the best match to the originals.  Full Details>>

Technical Info

Dreadnought Tiles conform to BS EN 1304:2013 and should be fixed in accordance with BS 5534 "Slating and Tiling" part 1 & 2 and BS 8000 Part 6.
Frozen-Icon2 webFreeze Thaw Standards require plain clay tiles for use in the U.K. to withstand at least 150 freeze / thaw cycles under method E of European Standard EN 539-2:2013.   At Dreadnought Tiles we regard this as too low for our climate and we therefore test our tiles to withstand in excess of 400 cycles. 

Download Freeze Thaw Testing Report >>

Download this info as a pdf >>

Download Specification sheet as a word doc >>

  Tiles Eaves Gable
Size 265x 165 mm 215x 165 mm 265 x 248 mm
Weight 1.19 kg 0.95 kg 1.8 kg
Pattern Traditional Single Camber    
Material Etruria Marl Etruria Marl Etruria Marl

 

  Pitched Roofs Vertical
Minimum Lap 65 mm 32 mm
Maximum Gauge 100 mm 115 mm
Approx Weight at
Maximum Gauge
71 kg/m2 63 kg/m2
Nails 38 x 2.65 mm alloy 38 x 2.65 mm alloy
Battens 38 x 25 mm 38 x 25 mm
Minimum Pitch 35 degree  

Quantity Guide

Tiles @ 100mm Gauge 60m2
115mm Gauge 53m2
Eaves/Tops 6/lineal metre
Gable (Tile and Half) 5/lineal metre of verge
Hips and Valleys 10/lineal metre of main rafter
Ridges Supplied in 300 mm and 450 mm lengths

Relevant Fixing Standards

BS 5534 2014 Code of Practice for Slating and Tiling
BS 8000-6.2013 Workmanship on Building Sites
BS EN 1991-1-4:2005+A1:2010 UK National Annex to Eurocode 1 -Actions on Structures - Part 1-4: General actions - wind actions

Environmental Info

Place of Manufacture: Brierley Hill, UK
Environmental Management:       ISO 14001        Download Certificate >>
Quality Management:                    ISO   9001        Download Certificate  >>
Health and Safety Management: ISO 18001

Life Cycle: BRE 'A+' rating
Freeze Thaw Testing to in excess of 400 cycles  Download Freeze Thaw Test Certificate >>
Energy: Fired in gas kilns to 1130 degrees
Raw materials: Etruria Marl Clay from our local quarry in Brierley Hill, sand
Lifespan: > 60 years. Second hand tiles that have been on roofs in excess of 100 years often sell for more than new tiles on the 2nd hand market
Recyclability: Can be crushed and used as aggregate and/or as an inert bulk fill
Packaging: We keep packaging to a minimum using wooden pallets. We do not shrink wrap or use plastic straps.

Find out more about Dreadnought Tiles approach to sustainability

Roof Components

Ornamental tiles

clubfishtailclub1 300x215

Further details

Fittings

Fittings-group-Shot 300x319

Further details

Ornamental Ridges

Ornamental-Ridges-Group-sho 300x212

Further details

Ornamental Finials

Finials-group-shot 300x229

Further details

Ventilation

vent 219x155

Further details

BIM

Dreadnought BIM Objects

We have one Revit model file (.rvt) that contains all the available Dreadnought Roof Tile Revit Family types in Revit 2016 format.  

Please complete the following details to access the Dreadnought Tile Revit File.

Please complete

 

 

Case Studies

View More Case Studies
"The Dreadnought product is excellent with dimensional, colour and textural quality consistent throughout".       Gary Worsfold, Director of Architecture, Quantum Homes  see more testimonials >>>>>