Dreadnought's new range of rustic tiles are available in all the sandfaced Dreadnought natural clay colours from reds and browns through to brindles and blues. Suitable for both renovation projects and newbuilds, they have a rustic, sanded finish and feature a distressed tail edge to give a soft effect and produce a highly attractive roof.
Dreadnought clay colours are derived from the mineral content within the etruria marl clay which produces a richness of colour on the roof. All other tile manufacturers use applied stains and coloured sands to produce their colour, but at Dreadnought we believe in the beauty of true clay colour, achieved through careful control of the kiln atmosphere.
Place of Manufacture: Brierley Hill, UK
Environmental Management ISO14001 Download Certificate >>
Quality Management ISO 9001 Download Certificate >>
Health and Safety Management ISO 18001
Life Cycle: BRE 'A+' rating
Freeze Thaw Testing to in excess of 400 cycles Download Freeze Thaw Test Certificate >>
Energy: Fired in gas kilns to 1130 degrees
Raw materials: Etruria Marl Clay from our local quarry in Brierley Hill, sand
Lifespan: > 60 years. Second hand tiles that have been on roofs in excess of 100 years often sell for more than new tiles on the 2nd hand market
Recyclability: Can be crushed and used as aggregate and/or as an inert bulk fill
Packaging: We keep packaging to a minimum using wooden pallets. We do not shrink wrap or use plastic straps.
Dreadnought Tiles conform to BS EN 1304:2013 and should be fixed in accordance with BS 5534 "Slating and Tiling" part 1 & 2 and BS 8000 Part 6.
Freeze Thaw Standards require plain clay tiles for use in the U.K. to withstand at least 150 freeze / thaw cycles under method E of European Standard EN 539-2:2013. At Dreadnought Tiles we regard this as too low for our climate and we therefore test our tiles to withstand in excess of 400 cycles.
|Size||265x 165 mm||215x 165 mm||265 x 248 mm|
|Weight||1.19 kg||0.95 kg||1.8 kg|
|Pattern||Traditional Single Camber|
|Material||Etruria Marl||Etruria Marl||Etruria Marl|
|Minimum Lap||65 mm||32 mm|
|Maximum Gauge||100 mm||115 mm|
|Approx Weight at
|71 kg/m2||63 kg/m2|
|Nails||38 x 2.65 mm alloy||38 x 2.65 mm alloy|
|Battens||38 x 25 mm||38 x 25 mm|
|Minimum Pitch||35 degree|
|Tiles @ 100mm Gauge||60m2|
|Gable (Tile and Half)||5/lineal metre of verge|
|Hips and Valleys||10/lineal metre of main rafter|
|Ridges||Supplied in 300 mm and 450 mm lengths|
|BS 5534 2014||Code of Practice for Slating and Tiling|
|BS 8000-6.2013||Workmanship on Building Sites|
|BS EN 1991-1-4:2005+A1:2010||UK National Annex to Eurocode 1 -Actions on Structures - Part 1-4: General actions - wind actions|