home icon
home icon
Creasing Tiles
 

Creasing Tiles are used in buildings for damp proofing and to add fine decorative finishes to brick and stone work.  Creasing tiles are plain clay tiles without nibs or camber and they are used for cappings and copings, damp proof courses (DPC), external cills, corbelling, arches, chimneys and decorative quoins.

Dreadnought manufacture Creasing Tiles in three traditional Staffordshire colours, Blue Brindle, Brown Brindle and Red and they are made to the same standards as the plain clay roof tiles.

How can I get a Sample      

Download Brochure

Creasing Tile Brown Brindle Creasing Tiles Blue Brindle Creasing tile Red creasing detail Plain tiles used as creasing tiles to add detail to wall creasing tiles are used here to add detail to the brickwork around the window creasing tile detail a combination of plain tiles and creasing tiles add detail to this wall Creasing Tile detail on a wall a combination of plain tiles and creasing tiles add detail to this brickwork

Technical Info

There are no standards specifically covering Creasing Tiles, however our creasing tiles conform to BS EN 1304:1998 which covers Clay Roof Tiles and Fittings and they exceed the specification in terms of transverse strength and water absorption.

  Creasing Tiles
Colour Staffordshire Blue Brindle, Staffordshire Red, Staffordshire Brown Brindle
Size 265x 165 mm
Thickness 11mm
Weight per tile 1.05 kg
Weight per pack 1.20 Tonnes
No of Tiles per pack 1000
Finish Smoothfaced
Material Etruria Marl
Transverse Strength 880N
Water Absorption 3.9%
Freeze/thaw resistance Conforms to BSEN 539-2

 

Environmental Info

Place of Manufacture: Brierley Hill, UK
Environmental Management: 14001        Download Certificate >>
Quality Management : 9001                    Download Certificate  >>
Health and Safety Management: 18001
Life Cycle: BRE 'A+' rating
Freeze Thaw Testing to in excess of 400 cycles  Download Freeze Thaw Test Certificate >>
Energy: Fired in gas kilns to 1130 degrees
Raw materials: Etruria Marl Clay from our local quarry in Brierley Hill, sand
Lifespan: > 60 years. Second hand tiles that have been on roofs in excess of 100 years often sell for more than new tiles on the 2nd hand market
Recyclability: Can be crushed and used as aggregate and/or as an inert bulk fill
Packaging: We keep packaging to a minimum using wooden pallets. We do not shrink wrap or use plastic straps.

Find out more about Dreadnought Tiles approach to sustainability

Laying Instructions

Laying Instructions

CT 1Creasing Tiles should be laid with a broken bond and a minimum lap of 75mm.  The joint width between tiles should not exceed 10mm in all applications.

When cutting creasing tiles, a mechanical disc cutter is recommended over hand cutting particularly when used in exposed areas, as this will provide a neater appearance and help avoid cracks that can reduce the performance of the creasing tile.

For freestanding walls where creasing tiles are used under brick cappings, day courses of clay tiles should be laid with staggered joints in a 1:1/4:3 mortar and a minimum projection from the wall of at least 45mm.

Case Studies

View More Case Studies
"The Dreadnought product is excellent with dimensional, colour and textural quality consistent throughout".       Gary Worsfold, Director of Architecture, Quantum Homes  see more testimonials >>>>>